• Donations

    If you like our website and want to give something back, you can make a donation.

    Please select a preferred amount of the donation, and then click the poster image below.

    Donation Amount

  • Construction of Fort Niebla.

    With Manzanera Island in the spray shop, I decided to crack on with Fort Niebla.
    Here I was lucky in two respects. There was an 18th century plan and I had enough parts left from the San Pedro build.





    Scaling up the plan I fitted the parts which needed little fettling over the plan.




    Next I cut a plasti-card base to the shape of the fort plan and assembled the parts






    The next job will be fitting and gluing the walls in place.
    Rob.

    The work continues with gluing up the fort.



    The last piece goes in.



    Rob.

    Today I ubnder coated the fort.



    Then gave it a base coat.



    Whilst it was left to dry I marked out and rough cut the headland ready for terra forming tomorrow.



    Rob.

    This morning I began a bit of terra forming with my router.







    Rob.

    More progress on fort and coast.



    By lunchtime today I was at the stage of gluing base to the terrain. Should be ready for an all over PVA seal tonight.
    Meantime I will position the forts guns and start to paint the village.







    Rob.

    Overnight I applied a stiff layer of PVA to the whole model excepting the beach.



    Once dry I undercoated in my usual mid brown.



    Rob.

    Today I got grassed up, and started to sand the beach area.






    Rob.

    Here is today's work with the woodland added.
    Now it's time to get on with the village.








    Rob.

    Well here's the end of the jolly old process. Town painted and glued down.
    Just a windmill and church on their way from the supplier to add.
    Now its off to the shop for a first coat of varnish overnight.





    Rob.

    I set up the Approaches to Valdivia this afternoon so that you could see the final layout with the three principal forts in position. Remember also that there are the forts Amargos, San Carlos and Ingles as well as a couple of lesser batteries further downstream.























    Rob.
    This article was originally published in forum thread: Construction of Fort Niebla. started by Bligh View original post
  • Recent Posts

    Bligh

    3D Ship Files / Kickstarter

    Here are mine at 1000th scale. As you can see there is hardly a smidgeon between them.
    Rob.

    Bligh Today, 07:32 Go to last post
    Bligh

    Nautical related Taverns.

    Cannon Tavern Ware.

    Bligh Today, 05:02 Go to last post
    Bligh

    Favourite Nautical related tipple.

    ...

    Bligh Today, 05:00 Go to last post
    Dobbs

    3D Ship Files / Kickstarter

    Thanks for all the explanations, Henry. Yes, my initial thought was that maybe I had gotten a 1/1200 Canada, but your diagrams match my physical reality.

    Dobbs Today, 04:55 Go to last post
    Bligh

    What's on Your Workbench for April?

    My schooner build starts here.

    Fitting Bowsprit and masts.

    Bligh Today, 04:55 Go to last post
    HenryTurner

    3D Ship Files / Kickstarter

    Glad to hear everything arrived!

    That goo is uncured resin that has failed to be cleaned off. To clarify, after printing every model got

    HenryTurner Today, 02:48 Go to last post
    Bligh

    3D Ship Files / Kickstarter

    According to Winfield.

    Canada as exemplified by the "Captain" was 170ft x 140ft.5in and 46ft 7in with a bm of 1632.

    Bligh Today, 01:18 Go to last post
    Diamondback

    3D Ship Files / Kickstarter

    Ganges should be 6" shorter LGD and almost a foot beamier, about 75 tons heavier. That pic looks almost like you have a 1/1000 Ganges and a 1/1200

    Diamondback Yesterday, 20:57 Go to last post
    Diamondback

    There's a New 3D Printer in the Shipyard

    Since some ships were cut and stretched fullsize, for them I'd suggest designers "cut" the model where the original was split and also offer

    Diamondback Yesterday, 20:52 Go to last post
    Diamondback

    All Flags to Half-mast!

    Condolences to our British friends.

    Diamondback Yesterday, 20:46 Go to last post
    Dobbs

    3D Ship Files / Kickstarter



    I'm curious, weren't Canada's and Ganges' about the same size historically? That the Canada on the left.

    Dobbs Yesterday, 19:43 Go to last post
    Comte de Brueys

    All Flags to Half-mast!

    My symapthy, gentlemen.

    Comte de Brueys Yesterday, 17:22 Go to last post
    Dobbs

    Bargemen

    Out of everyone in this crew, Eric, you stand the greatest chance of coming face to "face?" with these snacks...

    Dobbs Yesterday, 14:53 Go to last post
    Bligh

    Early Birthday present.

    Nothing to do with my birthday, honest, but today three more reinforcements breezed into the harbour at Chez Bligh.
    One for the US Navy, one for

    Bligh Yesterday, 13:21 Go to last post
    Bligh

    All Flags to Half-mast!

    Deeply moved by this. I met Prince Phillip on only one occassion, at Trent Bridge Cricket Ground during a Test Match. He was a very approachable man.

    Bligh Yesterday, 12:58 Go to last post
    Bligh

    New members signing on.

    This evening we are joined by a new shipmate from the USA. He is Brent, aka evanger from Minnesota.

    Rob.

    Bligh Yesterday, 12:50 Go to last post
    Bligh

    3D Ship Files / Kickstarter

    Even in a cloudy sky with the odd sunny periods they were done in a couple of hours.

    Rob.

    Bligh Yesterday, 12:40 Go to last post
    Capn Duff

    All Flags to Half-mast!

    Sad news RIP

    Capn Duff Yesterday, 12:07 Go to last post
    David Manley

    All Flags to Half-mast!

    Already done.

    I met him a couple of times. A great man who will be sorely missed..

    David Manley Yesterday, 08:56 Go to last post
    Naharaht

    All Flags to Half-mast!

    I request all captains to lower their flags to half-mast in salute at the death of The Lord High Admiral, H.R.H. Price Philip Duke of Edinburgh. He lived

    Naharaht Yesterday, 08:20 Go to last post