PDA

View Full Version : Warlord Games Brig.



Redcoat
11-05-2019, 12:12
Hello mates,

I add some photos about works at a spanish brig.

I have use the hull from Warlord Games and I have done the masts scratch build ussing brass and steel rods.
I have also sanded the top of the hull because it represent poorly the hamdocks ( it is only my opinion).
I have added two staples at the back to represent the davits.
Regarding the ratlines, I have used nickel silver (alpaca) ratlines stronger than brass ratlines.

46690

46691

46692

46693

46694

46695


Regarding the painting, I have used a typical color scheme of the historical period, yellowish ocher and black. The colors are mostly from the citadel brand but I also use modelcolor from vallejo.

The crew is from Eduard miniatures, scale 1/700 but I recommend do not cut the miniature by the marked limit, slightly lengthening the area of the head and legs. That way, we can adjust the size of the miniaures to the reality of the Warlord Games ship scale.

46696

46697


Photos of the finished model.

46698

46699

46700

46701

46702

46703

46704

46705

46706

46707

46708

46709

46710

46711

Bligh
11-05-2019, 13:47
A new venture Julián, but executed with your usual panache and attention to detail.
I also like the masts and cross trees. They look much more sturdy.
May I ask which ships boats you have used for this new scale model?

Rob.

Redcoat
11-05-2019, 14:14
A new venture Julián, but executed with your usual panache and attention to detail.
I also like the masts and cross trees. They look much more sturdy.
May I ask which ships boats you have used for this new scale model?

Rob.

The hull is from Warlord, is the generic brig. I plan to do other ones but with modifications to the sails.

DeRuyter
11-06-2019, 12:13
Beautiful work as always. I don't like the stern on the Warlord brig model, just does look right. Yours looks better with the davits.

Are those ship's boats from Langton?

Redcoat
11-06-2019, 12:28
Beautiful work as always. I don't like the stern on the Warlord brig model, just does look right. Yours looks better with the davits.

Are those ship's boats from Langton?

Thank you Eric, you are right with the brig's stern, they could have done it better.

The boats are from Meridian

Bligh
11-06-2019, 13:14
What scales do Meridian work in Julián?
Rob.

Redcoat
11-06-2019, 13:19
What scales do Meridian work in Julián?
Rob.

The same that Warlord, 1/700

Bligh
11-06-2019, 15:37
Very useful to know.
Thanks Julián.
Rob.

DeRuyter
11-07-2019, 08:17
I forgot to add that the ratlines look amazing. Much better than the ones that Warlord supplies (although I appreciate they give you everything needed in the box).

Redcoat
11-07-2019, 08:37
I forgot to add that the ratlines look amazing. Much better than the ones that Warlord supplies (although I appreciate they give you everything needed in the box).

The problem is with the type of plastic that the masts are made and on the other hand the type of material of the ratlines. All these does the rigging is not profitable for those ships, it is a matter of a year that the rigging is ruined.

Bligh
11-07-2019, 13:14
I think that when push comes to shove I will opt for the metal ratlines.

Rob.

Redcoat
11-07-2019, 13:26
I think that when push comes to shove I will opt for the metal ratlines.

Rob.

You will do correctly, I speak from my experience and I predict a catastrophe with the rigging and masts on the Warlord Games ships. It's a shame but it's the reality.

Bligh
11-07-2019, 13:46
Thanks Julián.
Rob.

Redcoat
11-07-2019, 15:22
Thanks Julián.
Rob.

Now, I am working in a 3rd rate.

46730

46731

46732

TexaS
11-08-2019, 01:43
I'm sad to say I think the vessels look a little too cartoony for my taste.

I'm not sure in what way, but Ares managed to make the ships give a great impression. Yes, their masts/sails support looks bad, but the sails themselves look great and the hulls have a great shape that really captures the shapes in the old sailing ships better than almost any other. Sometimes even Langton get a shape where the sterncastle looks a bit too big taking away from the over all look. That is something that Ares really have suceeded in, capturing the looks and shapes from old paintings.

The ratlines look good, but I still miss the slight sagging of the ratlines between the shrouds that was done on the anchorage store ratlines.

Redcoat
11-08-2019, 01:59
I'm sad to say I think the vessels look a little too cartoony for my taste.

I'm not sure in what way, but Ares managed to make the ships give a great impression. Yes, their masts/sails support looks bad, but the sails themselves look great and the hulls have a great shape that really captures the shapes in the old sailing ships better than almost any other. Sometimes even Langton get a shape where the sterncastle looks a bit too big taking away from the over all look. That is something that Ares really have suceeded in, capturing the looks and shapes from old paintings.

The ratlines look good, but I still miss the slight sagging of the ratlines between the shrouds that was done on the anchorage store ratlines.

One factor that increases that cartoonish feeling is the great canyons they have made. I would have liked them to have been correctly scaled but they have not wanted to do so. When I asked why, they answered that it was a technical issue but I know it is not for that.
I think the same, Ares has a full range of boats with a fairly acceptable design. Regarding Langton, what you say usually happens with their older models.
The ratlines from Ares are possibly the best I've seen in the market but if they are brass and so thin, I think that their manipulation can be somewhat expensive and risky, I have never worked with this type of ratlines but if you have used some ratlines from Ares, you could confirm this, I would be grateful.

TexaS
11-08-2019, 02:45
Yes, the size of the guns is part of it, but also somehown they've made that third rate look more like a first rate in your picture from above. Yes it's missing a deck to really look like a first rate. It might be that it's too wide for it's lenght or something.

Yes, it might be older Langtons. I've seen it in a few out of a big range, so it's not a big deal.

Ares ships still have some problems apart from the masts, like the stern gallery on some ships look pretty bad. Still I contribute this to production rather than design. It's also been improved on later ships. (Where they've failed on other accounts.)

The ratlines aren't Ares, but from Keith here on the Anchorage. They were only made for the ships in the starter sadly. Yes, they are made from brass and very thin. They are indeed fiddly to work with and require a ot of patience.

Bligh
11-08-2019, 02:54
Now, I am working in a 3rd rate.



46731



Are the fighting tops made from Plasticard Julián ?
If so how do you fit the crosstrees securely?

Rob.

Redcoat
11-08-2019, 03:14
Robe, I hope this help.

46738

46739

Redcoat
11-08-2019, 03:21
Yes, the size of the guns is part of it, but also somehown they've made that third rate look more like a first rate in your picture from above. Yes it's missing a deck to really look like a first rate. It might be that it's too wide for it's lenght or something.

Yes, it might be older Langtons. I've seen it in a few out of a big range, so it's not a big deal.

Ares ships still have some problems apart from the masts, like the stern gallery on some ships look pretty bad. Still I contribute this to production rather than design. It's also been improved on later ships. (Where they've failed on other accounts.)

The ratlines aren't Ares, but from Keith here on the Anchorage. They were only made for the ships in the starter sadly. Yes, they are made from brass and very thin. They are indeed fiddly to work with and require a ot of patience.

Honestly, I don't think it looks like a first rate, I have third rate Meridian ships and I have compared them and the dimensions are correct. Simply that Warlord has unnecessarily exaggerated the size of the guns. For the rest, it seems to me that they are properly proportioned.

DeRuyter
11-08-2019, 09:28
I'm sad to say I think the vessels look a little too cartoony for my taste.

I'm not sure in what way, but Ares managed to make the ships give a great impression. Yes, their masts/sails support looks bad, but the sails themselves look great and the hulls have a great shape that really captures the shapes in the old sailing ships better than almost any other. Sometimes even Langton get a shape where the sterncastle looks a bit too big taking away from the over all look. That is something that Ares really have suceeded in, capturing the looks and shapes from old paintings.

The ratlines look good, but I still miss the slight sagging of the ratlines between the shrouds that was done on the anchorage store ratlines.

That is what I thought when I saw the USS Constitution model. Something was out of proportion. I just saw an unboxing video and the resin hull is definitely not as crisp as the plastic hulls.

Bligh
11-08-2019, 12:07
Robe, I hope this help.

46738

46739

That is most useful Julián. I use the same method with my WW2 ships except for the thread. I can see that it gives that extra security for the mast sections.
For the cross trees I silver solder but with the plastic fighting tops that can't be done.
How do you fix the cross trees to that lot?
Rob.

Redcoat
11-08-2019, 12:26
Rob, to fix the cross trees I use superglue. PVC foam glued very well with steel and bass.

Bligh
11-08-2019, 13:06
I see you also put lashings on this.
Thanks again for your very patient answers to all these questions Julián.
Rob.

Ferrante
11-12-2019, 10:49
Very nice colors,
I like the mast you did Julián
I am waiting to see that 3rd rate

DeRuyter
11-25-2019, 08:36
Rob, to fix the cross trees I use superglue. PVC foam glued very well with steel and bass.

Further question on this one - What did you make the gaff and boom jaws out of? PVC foam as well?

Redcoat
11-25-2019, 08:39
Further question on this one - What did you make the gaff and boom jaws out of? PVC foam as well?

Thread + superglue

DeRuyter
11-26-2019, 10:24
Thread + superglue

Great thanks!